How to Connect a Wi-Fi Repeater: A Step-by-Step Guide

How to Connect a Wi-Fi Repeater: A Step-by-Step Guide

In this article, you will learn how to connect a Wi-Fi repeater to your router and your devices. You will also find some useful tips on how to choose the best location and settings for your Wi-Fi repeater. By following these steps, you will be able to enjoy a faster and more reliable wireless connection throughout your home or office.

How to Connect a Wi-Fi Repeater

  1. Choose a suitable location for your Wi-Fi repeater. You want to place it somewhere that is within the range of your router’s signal, but also close enough to the area that needs better coverage. Avoid placing it near metal objects, walls, or other sources of interference that can weaken the signal.

  2. Plug the Wi-Fi repeater into a power outlet and turn it on. You may need to wait for a few minutes for it to boot up and initialize.

  3. Connect the Wi-Fi repeater to your router. There are two ways to do this: using WPS (Wi-Fi Protected Setup) or using a web browser. If your router and repeater have a WPS button, you can simply press it on both devices within two minutes and they will automatically pair up. If not, you can use a web browser on your computer or smartphone to access the repeater’s settings page. To do this, you need to connect your device to the repeater’s network (usually named something like “WiFi-Repeater”) and enter its IP address (usually in the address bar. Then, follow the instructions on the screen to select your router’s network and enter its password.

  4. Connect your devices to the Wi-Fi repeater’s network. Once the repeater is connected to your router, it will create a new network with the same name as your router’s network, but with “_EXT” or “_RPT” added at the end. For example, if your router’s network is called “Home_WiFi”, the repeater’s network will be called “Home_WiFi_EXT” or “Home_WiFi_RPT”. You can connect your devices to this network using the same password as your router’s network.

  5. Enjoy your extended Wi-Fi coverage. You can now use your devices in areas that were previously out of reach or had poor signal quality. You can also check the status of your repeater by logging into its settings page again.


Q: How do I know if my Wi-Fi repeater is working properly?

A: You can check the signal strength and speed of your Wi-Fi repeater’s network using an app like Speedtest or WiFi Analyzer on your device. You should see an improvement compared to your router’s network in terms of coverage and performance.

Q: How do I change the name or password of my Wi-Fi repeater’s network?

A: You can change the name or password of your Wi-Fi repeater’s network by logging into its settings page using a web browser. You can find the option to change these settings under Wireless Settings or Wireless Security.

Q: How do I reset my Wi-Fi repeater if I forget its password or IP address?

A: You can reset your Wi-Fi repeater by pressing and holding its reset button for about 10 seconds until its LED lights flash. This will restore it to its factory default settings and erase any changes you have made.


A Wi-Fi repeater is a handy device that can help you extend your wireless network coverage and boost your internet speed. By following these simple steps and tips, you can easily set up a Wi-Fi repeater and enjoy a better online experience.

Post Comment